KS-832LL
High quality rear loading panel saw, using for precision sawing wood board and other boards, with a complete set of optimization software（optional）,which can be connected to a variety of disassembly software, optimizing layout automatically, automatic feeding,high board utilization rate and cutting efficiency.
Detail Information
1. The pressure beam lifting adopts high precision double bar cylinder,special pneumatic control, reduce cylinder spare travel and improve cutting efficiency.
2. Saw carrier drive system adopts servo control and gear rack transmission, steady and rapid operation, can realize automatic positioning according to the different cutting width cutting stroke, reduce the travel time, improve work efficiency, maximum cutting speed can reach 95m/min and return 110m/min.
3. The working table is equipped with pneumatic floating ball mesa, which effectively prevents scratch on the board, and the board movement is more portable.
4. The gripper adopts the Swiss imported high precision reducer and gear rack, and the precision of the cutting plate can reach ± 0.1mm.
5. With flexible double finger structure, the minimum clamping size can achieve 34*45mm, and the number of grippers can be appropriately increased according to the needs of customers (option).
6. The main saw and the auxiliary saw adopt independent elevator control system, and the main saw can automatically adjust the rising height according to the cutting thickness to achieve the best sawing effect.
7. Based on the PC operating system, with full operation instructions and troubleshooting guidelines, it can be compatible with a variety of sawing optimization software, bar code management software and factory automation software.
Auto locating in saw blade :independent lifting system in saw blade;Sawing Locating: automatically position according to sawing width, so as to reduce the free running and improve the efficiency
Adjust for the scoring saw blade could be controlled back and forth,up and down by PC,greatly reduing the time in blade replacement.
Magnetic grid positioning is adopted to the lifting measurement,and the min. thickness for the workpiece is 8 mm
The movement of the machinical arm is supported by Swiss high-precision reducer, rack and pinion, cutting accuracy of ± 0.1mm.
Working table with pneumatic floating balls,effectively prevent scratched on panel,and easier movement
Lifting roller adopts hydraulic control,stable in lifting
Side Alignment,the small panel positioning more accurate.
CONFIGURATION FEATURES
Technical Specifications
Standard Machine Parameters
