KS-842HL
High quality rear loading twin pusher panel saw, using for precisely sawing wood board and other boards, with a complete set of optimization software（optional）,which can be connected to a variety of disassembly software, optimizing layout automatically, automatic feeding,high board utilization rate and cutting efficiency.
Detail Information
1. The pressure beam lifting adopts high precision double bar cylinder,special pneumatic control, reduce cylinder spare travel and improve cutting efficiency.
2. Saw carrier drive system adopts servo control and gear rack transmission, steady and rapid operation, can realize automatic positioning according to the different cutting width cutting stroke, reduce the travel time, improve work efficiency, maximum cutting speed can reach 120 m/min and return 150 m/min.
3. The working table is equipped with pneumatic floating ball mesa, which effectively prevents scratches on the board, and the board movement is more portable.
4. The gripper adopts the Swiss imported high precision reducer and gear rack, and the precision of the cutting plate can reach ± 0.1mm.
5. With flexible double finger structure, the minimum clamping size can achieve 34*45mm.
6. The main saw and the auxiliary saw adopt independent elevator control system, and the main saw can automatically adjust the rising height according to the cutting thickness to achieve the best sawing effect.
7. Based on the PC operating system, with full operation instructions and troubleshooting guidelines, it can be compatible with a variety of sawing optimization software, bar code management software and factory automation software.
Double push device: It is composed of two pairs of manipulators.It can cut different lengths of plates , and improve the cutting efficiency
double beam structure，main clamp and pusher working separately，improve the efficiency.
Magnetic grid positioning is adopted to the lifting measurement,and the min. thickness for the workpiece is 8 mm
Min workpiece thickness is 8mm
Main saw power is 18.5KW(frequencescaling),available for rapid cutting in mass,the max. return velocity could be up to 150m/min.
Automatic positioning of the saw blade: The main and auxiliary saws can be independently lifted and lowered to reduce idle stroke and improve work efficiency.
Siemens PLC and electrical components.
CONFIGURATION FEATURES
Technical Specifications
Standard Machine Parameters
