KE-365
Features:full automatic edge bander, gluing+endcutting+trimming+scraping+buffing
Detail Information
Apply to many kinds of panel edging. Include gluing, endcutting, trimming, scraping, buffing function, can meet panel edge banding request. 1.PLC auto control system:feeding speed15-23m/min;
2.Auto lift;
3.Temperature holding function, automatically turn into a lower temperature stage after certain idle period, save electricity and prevent glue carbonization;
4.Endcutting lubrication system:keep endcutting unit work frequency, improve parts use life;
5.Can work with 40mm width panel, solved traditional manual edging narrow panel.
10 inch touch screen,Smart temperature control: Can set the function of heat preservation, when the equipment is empty, automatically switch to the function state of shutdown.
End cutting unit: Remove the superfluous edges.
Fine trimming unit: Remove the upper and lower sides of the edge out of the upper and lower surfaces of the board.
Buffing unit: Remove the edges of the edge of the seal edge and the residual glue between the edge and the board, making the edges of the board more clean and smooth.
Gluing & press unit: Apply the melt adhesive to the sealing surface of the workpiece. Through the special structure, the sealing side plate and the sealing side materials are evenly coated.
Endcutting automatic lubrication system: Ensure the endcutting unit to run smoothly,and prolong service life of the part.
Scraping unit, effectively scrap off the grains on the edge tape as well as the visible glue line
CONFIGURATION FEATURES
Technical Specifications
Standard Machine Parameters
