KE-365J
Features: full auto edge banding machine, pre-milling +gluing +end cutting +fine trimming + scraping +buffing
Detail Information
Apply to many kinds of panel edge banding. With basic functions: pre-milling, gluing, end cutting, trimming, corner trimming, scraping, buffing function, it meets the basic needs panel edge banding
1.PLC auto control system: feeding speed 15-23m/min;
2.Auto lifting
3.Temperature holding function, automatically turn into a lower temperature stage after certain idle period, save electricity and prevent glue carbonization; improve efficiency and save energy
4.End cutting lubrication system: make sure end cutting unit run smoothly, improving parts service life;
5.The minimum width of the work piece is 40mm, a perfect and efficient solution to the traditional manual edge banding for narrow panel
10 inch touch screen, smart temperature control: Can set the function of heat preservation, when the equipment is empty, automatically switch to the function state of shutdown.
Gluing&pressing unit:work piece conveys to the gluing device, glueing,and then conveys to the guilotine unit, cut the edge tape as needed,then, adhesive the panel and edge tape.
Endcutting automatic lubrication system: Ensure the endcutting unit to run smoothly,and prolong service life of the part.
Scraping unit, effectively scrap off the grains on the edge tape as well as the visible glue line
Pre-milling unit: Large diameter diamond tool head, motor power 3.7kw, maximum pre-milling height 40mm (optional 65mm).Milling surface size≥120mm.
Endcutting unit: By precise straight line guide moving,cut off the end of the workpiece to ensure that the cutting surface is even and smooth.
Fine trimming unit: Remove the upper and lower sides of the edge out of the upper and lower surfaces of the board.
Buffing unit: Remove the edges of the edge of the seal edge and the residual glue between the edge and the board, making the edges of the board more clean and smooth.
CONFIGURATION FEATURES
Technical Specifications
Standard Machine Parameters
