KE-368SGA
Features:full automatic edge bander, gluing+endcutting+rough trim+fine trimming+scraping+buffing.
Detail Information
Apply to variety panel's edging. Include gluing, endcutting, rough trimming,fine trimming, scraping, buffing function, can meet panel edging request
1.PLC auto control system:feeding speed15-23m/min;
2.Auto lift;
3.Temperature holding function, automatically turn into a lower temperature stage after certain idle period, save electricity and prevent glue carbonization;
4.Endcutting lubrication system:keep endcutting unit work frequency, improve parts use life;
5.Can work with 40mm width panel, solved traditional manual edging narrow panel.
6.Rough trim and fine trim, improve tools use life.
10 inch touch screen,smart temperature control: Can set the function of heat preservation, when the equipment is empty, automatically switch to the function state of shutdown.
Double Gluing and Pressing System（with G model): Double gluing system, quick switching between dark and white improve production efficiency.
Endcutting automatic lubrication system: Ensure the endcutting unit to run smoothly,and prolong service life of the part.
Scraping unit: Effectively scrap off the grains on the edge tape as well as the visible glue line
Gluing&pressing unit:work piece conveys to the gluing device, glueing,and then conveys to the guilotine unit, cut the edge tape as needed,then, adhesive the panel and edge tape.
Endcutting unit: By precise straight line guide moving,cut off the end of the workpiece to ensure that the cutting surface is smooth and smooth.
Rough and fine trim(with "A" model is double fine trim): Remove the upper and lower sides of the edge out of the upper and lower surfaces of the board.
Pneumatic Control System（with A model）： Suitable for customized furniture production.automatically change between 4 different kinds of edge thickness from the HMI， more efficiency.
CONFIGURATION FEATURES
Technical Specifications
Standard Machine Parameters
